1T19L-7 Firestone Rubber Air Bellow W01-358-9121 Truck Air Spring Bags For Volvo 3130503

Product Description

Model NO.:1T9121
Certification: ISO/TS16949
Position: Front and Rear
Type: Suspension Spring
Weight: 11kg
Packing Size: 27*27*39(cm)
Transport Package: Neutral Packaging
Origin: China
Material: Rubber
OEM: Yes
HS Code: 87088090000

1T9121 Truck Air Spring Specifications

• The vehicle sinks on one side or as a whole after parking.
• Frequent inflation is required to maintain normal height.

Possible causes:

• Aging, cracking or scratching of the airbag rubber.
• Poor or damaged air nozzle seal.
• The air pipe (trachea) is broken or the joint is loose.

Solution:

• Apply soapy water to the surface of the airbag to find the leak point (the bubbling point is the leak point).
• Replace the damaged airbag or repair the air nozzle/pipeline.

2. The airbag is bulging or deformed

Failure phenomenon:

• The airbag is partially bulging or twisted, and the shape is asymmetrical after inflation.
• The bumpy feeling is aggravated when the vehicle is driving.

Possible causes:

• The cord layer (internal reinforcement layer) is broken.
• Structural damage caused by long-term overloading or excessive air pressure.

Solution:

• Replace immediately! A bulging airbag may burst at any time.

3. Airbag rupture

Fault phenomenon:

• Suspension collapses suddenly and the vehicle body tilts severely.
• Accompanied by a "bang" explosion sound (in an emergency).

Possible causes:

• Piercing by sharp objects (such as metal fragments on the road).
• Aging of rubber + extreme load impact.

Emergency treatment:

• Use pads to support the frame after parking to avoid damage to other parts.
• Do not continue driving before replacing the airbag!

4. Abnormal sound (squeak/friction sound)

Fault phenomenon:

• A "squeak" sound is heard when passing over speed bumps or bumpy roads.

Possible causes:

• The airbag rubs against the metal base (insufficient lubrication).
• The suspension link/bushing is worn, causing the airbag to be misaligned.

Solution:

• Check the airbag installation position and apply special silicone grease for lubrication.
• Check other suspension parts (such as shock absorbers and swing arms).

5. Abnormal suspension height

Fault phenomenon:

• The height of the left and right sides of the vehicle is inconsistent (one side is higher and the other side is lower).
• The automatic leveling system fails.

Possible causes:

• Height sensor failure.
• The distribution valve or solenoid valve is blocked/damaged.
• The airbag on one side leaks or the air pressure is uneven.

Solution:

• Check the sensor circuit and valve body.
• Calibrate the suspension height or replace the faulty parts.

6. Aging/cracks on the rubber surface

Fault phenomenon:

• Fine cracks, chapped or powdered on the surface of the airbag.

Possible causes:

• Long-term exposure to ultraviolet rays, ozone or oil.
• Exceeding the service life (usually 5-8 years or 800,000 kilometers).

Preventive measures:

• Clean the airbag regularly and avoid contact with corrosive liquids such as engine oil and diesel.
• Try to avoid direct sunlight when parking.

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.